The small nut that secures the end of each spoke to the rim of your wheel is what we call as nipples. Each nipples are made up of aluminum cylinder or with a small brass with an internal head. They consist of a spherical or conical head that sits the rim and outer end of the cylinder that have flattened areas. Due to spherical or conical head they can be tightened and gripped with a special tool. They work by exerting tension on the spokes.
The threaded interior of the bike spoke nipple matches the screw thread on the end side of the spoke. You can achieve the correct tension by loosening or tightening the nipples, which increases or decreases the tension on the spoke. By adjusting the tension the wheel spins ‘true’ is one of the integral skills of wheel adjustment and building. When it comes to picking nipples, while replacing the broken spokes there are few things to keep in mind, these being materials, nipple length and thread diameter.
Length: Nipples are usually 12, 14 or 16 mm in length. To carry the load from spoke to the top of the nipple, the spoke should be long enough to engage the full length of spoke nipple threads, if you are using the aluminum nipples.
Diameter: It is very important that the internal diameter of the nipple thread matches the external diameter of the spoke thread. That is why most spokes come with nipples included.
Materials: Nipples are made either from aluminum or from brass. Brass is more durable but heavier. Aluminum nipples may save some weight but they may be more prone to damage. Therefore take care not to strip the threads or round the flats.
1) Dt Swiss 14G Brass Nipple Spoke (Box of 100), 2mm
This Dt Swiss 14G Brass nipple spoke , 2mm is a classic all round spoke for everyday use. For the durability of a wheel, the interface between nipple and spoke is highly important. With or without the patented locking system DT Pro Lock, all DT Swiss nipples are available. This 14 gauge spoke is available in wide range of sizes and throughout its length it’s 2mm thick. In corrosive environments the DT Swiss brass nipples are durable and offer high strength under extreme tension.
Due to its high strength and superior corrosion resistance, Brass is an excellent material choice for nipples. For wheels intended for daily training, commuter use, use in wet/corrosive environments or for e-bikes, we highly recommend the use of brass nipples. The brass nipples always work where aluminum nipple fails. With these brass nipples pack of 100 you can easily got your wheel trued, tensioned and ready to roll.
- All round spoke
- Offer high strength
- Best for wet environment or for daily use
- A bit difficult to adjust
2) Wheelsmith 14 Gage Bicycle Spoke Nipples – Duristan Brass – Bag of 50
This wheelsmith 14 Gage bicycle spoke nipple -Duristan Brass are precision forged from high grade brass. Their strength is enhanced by keeping them full-width, forging the spoke wrench flats and very uniform. They have more threads than others. Each nipple holds a full 8mm of thread. The extra threads are in the region of reinforcing the flats, spoke wrench and making collapse less likely. These nipples are also 1mm longer than others.
Since each nipple catches the spoke earlier, the additional threading also benefits wheel assembly, leaving more slack during lacing. Once a wheel is finished, the threading is far less likely to show. Duristan produces an excellent shiny surface with a slightly blue cast. For its corrosion resistance, the nipples are coated with a unique inter-metallic substance Duristan.
- High grade brass
- Have more threads
- Easy for wheel assembly
- Threading is far less likely to show
- A customer have issue that it wore down after some work.
For adjusting spoke tension nipples are important. The spoke tension will true a wheel and make it straight when spun. These nipples hold a bicycle wheel’s rim to each spoke. Some wheel builders typically count the number of turns of the spoke key to ensure every spoke is tensioned to the same degree.
Spokes are mighty little dudes that may look more than metal toothpicks that fill the space between wheel and axle. The spokes are very helpful to add strength to your rim. They are also helpful to transfer your leg power from the hub to the wheel. Bike spokes are also helpful to support your weight on the wheel. They hold the rim at the bay and don’t push outward, like it might seems. The spokes evenly pulled the rim inward which are laced through the hub, which is the center part of the wheel that rotates around the axle. If you are searching for how to measure a bike spoke then you love to know that their are different tools available online for replacing a bike spoke.
Making the assembly resistant to shock, somewhat flexible and extraordinarily strong by applying the tension between the rim and hub evenly in all directions. Due to this equally applied tension the wheels supports your weight. To make the bike go, the other key role of the spokes is to transform the power from your legs. So that there is not too much stress on any single spoke, the force driving the bike forward is distributed among many spokes.Spokes radiate outward to the rim, starting at the hub in the center of the wheel, where they attach to nipples, which are like little nuts that screw onto the spoke ends.
Turning the nipple pulls the rim slightly to the right or left and increases or decreases the tension of the spoke. When the spoke tension is out of balance the rims become warped or out of true. Straitening a wheel is a difficult task that’s best left to a mechanic. You can easily find bike spoke accessories online like dirt bike spoke skins or spoke covers for dirt bike, bicycle spoke reflectors, led lights, spoke lights for bikes, spoke tools, bike spokes beads, reflectors spokes, spoke wrench and other bike spoke decorations online shop from amazon. You can also find bike spoke cards, electric bike spokes, bike spokes for 26 inch wheels and different bike tire valve types from amazon.
When the wheel hits something hard and throwing off the spoke tension, deforms the rim slightly, this result simply from using the bike, from spokes loosening on their own or from damage to the rim. You should tighten the spoke until it’s snug, if your bike has a loosen spoke or two and plan to have the wheel trued soon. Just remember that over-tightening a single spoke can also pull a wheel out of true.
3) SENQI 36pcs 14G J Bend Bicycle Steel Spokes 170mm-290mm W/Nipples
This SENQI 36 pcs 14G J bend bicycle steel spokes are made up with high quality steel. The best thing about this spoke is that you don’t have to buy extra nipples with it because with the spokes the nipples are included in the package. The length of spokes depend on your weaving method, rims and hubs. You can measure your old spokes first to place the order. These are 14g specification bicycle spokes. The nipples that come with it are 12.11 mm. These nipples are standard on all.
The length of the spoke cap is 12 mm. The spokes that are shipped are exactly of the specification that you order. Wheel smithing is an art and great spokes like SENQI make it easier for you. For a strong and long lasting end product the wheelbuilding requires a correct building procedure. To construct a tension-spoked wheel from its constituent part is called wheelbuilding. If your bike spoke broken or you are replacing a bike spoke, then these spokes are no doubt one of the best option.
- Built with high quality steel
- Great product at this prics
- Comes with nipples
- If they also have brass nipples that would be excellent.
4) Bavel 36pcs Steel Spokes Mountain Bike Spokes MTB 281mm-295mm W/Nipples
This Bavel 36pcs steel spokes mountain bike spokes is made up of high quality steel. It is a 14G model that comes with a diameter of 2mm. The best thing about it is that they also delivers nipples too. The package that delivers to you consist of 36 spokes and 36 nipples. You should have to order spoke around 240mm if your wheel is 24 guess and if your wheel is 29 then this 281-295 mm is excellent for you to order. Always make sure that you have perfect bike spoke tension or perfect bike spoke tightening with wheels.
If you want to measure your spoke then you have to measure your hub flange diameter at the spoke holes and from hub width flange to flange and the diameter of your rim from the place where the nipples will be seated. These are simply made up of lighter and of stronger material than SS spokes. The nipples that comes with it is made up of a soft metal. It have a nice finishing and it have a great quality.
- Strongly built
- Nice finishing
- Nipples are included
- Quality product
- Nipples are of medium quality
You need to choose the best bike spoke as we have reviewed above. These are the mighty little dudes that have important jobs to do like they add strength to your rim, they support your weight on the wheel and transfer your leg power from the hub to the wheel. Although a spoke seems to be a relatively piece of wire but many processing and material development go into them. Therefore, you need to give spokes a little bit of respect and have to choose them wisely.